skip to content »

ik-kem.ru

Pass cams xxx 2013

Pass cams xxx 2013-62

Keep these in a safe place together with the Instruction Manual. You are then asked to enter the user name and password of the administrator.

Pass cams xxx 2013-71Pass cams xxx 2013-41Pass cams xxx 2013-36Pass cams xxx 2013-75

Please study this information in detail observing, in particular, the safety instructions. You will need the enclosed warranty card and your sales receipt in the event of the camera developing a fault. Click on “Apply” to accept the changed settings. Intended use „ This Wi Fi Network Camera is solely designed for the surveillance of internal areas. Lens Infrared LED Sensor WLAN connection Audio connection (no function) 6. To drill the holes for the dowels, use a 6 mm masonry drill bit for stone or concrete walls or a 3 mm drill bit when attaching to timber. We therefore ask you to read and strictly observe the following Hazard, safety and warning notices. t 8IFOTFMFDUJOHUIFJOTUBMMBUJPOBSFBGPSDBNFSBT FOTVSFUIBUOPTVOMJHIUTIJOFT into the lens. 4.3.1 Attaching the wall bracket Hold the plate of the wall bracket against the surface of the selected place of installation and, using a pencil, mark two holes on the surface through the holes in the plate. „ Switch off camera if camera has been dropped or housing is damaged, as there is a danger of fire and electrocution. Using the Browser access, the Wi Fi Network Camera can, however, also be set up for and controlled by Mac OS, Linux or other operating systems. Wait until completely dry, as there is a danger of fire and electrocution. Set up a wireless connection between the Wi Fi Network Camera and the router via WLAN (see section 5.7, Setting up a wireless connection). Set up port forwarding in the router to allow the Wi Fi Network Camera to be accessed from the Internet (see section 5.8, Internet access). Install the App “Maginon IPC Viewer” for Smartphones and Tablet PCs (see section 8, Use with mobile devices). System requirements Operating system: The software provided on the enclosed CD solely runs on Windows systems. Introduction System requirements Hardware installation Software installation Connecting the Wi Fi Network Camera Installation on Mac OS X Setting up a wireless connection Internet access 11 11 12 13 14 15 17 20 21 6. „ Ensure that all sockets used are always accessible so that the power supply can be quickly interrupted when required. „ yellow: indicates that network activity is taking place.

Activating the Wi Fi Network Camera Controlling the Wi Fi Network Camera 7. Replace the power supply with same type of power supply. Two control LEDs are positioned above the LAN connection of the Wi Fi Network Camera.

Ensure, in particular, that ventilation openings are not covered by newspapers, table cloths or curtains. By selecting the option “Instruction manual” from the start menu of the software CD, the Instruction manual in the system language of the computer can be opened on screen. In the event of your computer not containing a suitable program for viewing PDF documents, you can also install the program “Adobe Acrobat Reader”. Connecting the Wi Fi Network Camera Ensure that the Wi Fi Network Camera is connected to the router via the network cable and is connected to the mains (see section 5.3, Hardware installation). In the program select “Start search” to view a list of reachable Wi Fi Network Cameras.

Injuries and material damage „ When installing and assembling the Wi Fi Network Camera ensure a 3.94 inch gap on all sides to ensure adequate ventilation. Once the installation has been completed, the program can be found under All Programs as supra IPCam Config.

„ Ensure adequate ventilation and do not cover the power supply to prevent overheating. Note: t If your router does not have a connection for a network cable, the surveillance camera can also be set up without a router.

The device can only be disconnected from the mains by pulling out the power supply plug. „ green: indicates that the Wi Fi Network Camera is connected to a network.

„ It is your responsibility to ensure that no personal rights of third parties are infringed when using the Wi Fi Network Camera. If under address an address other than 0.0.0.0 appears, the automatic network set up of the Wi Fi Network Camera was successful.